The CMIT 5 is SCHOEPS' shotgun microphone which has set a new standard for shotgun microphones since its release. The CMIT 5's directionality increases smoothly with higher frequencies, which results in a very balanced sonic character. In addition to this, the microphone's sound level decreases softly yet steadily for off-axis sounds, allowing these to be recorded neutrally as well as reducing the effects of movement during boom operation. The CMIT 5 also has a much stronger directionality than one might expect from a microphone of its length. If required, the CMIT 5 can also be used for music recordings, for example opera recordings.
The similar MiniCMIT offers the features of a CMIT 5 in a compact design and is especially recommended for use with digital wireless transmitters.
**Lead times apply - Please Check**
TECHNICAL SPECIFICATIONS
Pickup pattern
Supercardioid / lobe-shaped
Frequency range
40 Hz - 20 kHz
Sensitivity
-35 dB (V/Pa), 18 mV/Pa
Equivalent noise level (A-weighted)
13 dB
Equivalent noise level (CCIR)
24 dB
Signal-to-noise ratio (A-weighted)
81 dB
Maximum sound pressure level (THD < 0.5 %)
131 dB-SPL (P48)
Maximum output voltage
1.3 V (2.5 dBV) with 1 kΩ load
High shelf filter
switchable, +5 dB at 10 kHz
Low cut filter
switchable, 80 Hz, 18 dB/oct.
Proximity filter
switchable, 300 Hz, 6 dB/oct.
Minimum recommended load impedance
1 kΩ
Output impedance
50 Ω
Maximum cable length
> 400 m
SCHOEPS RFI Shield
Yes
Powering standard / Valid range
P48 / >34 V
Current consumption
4.4 mA (P48)
Common mode rejection ratio (at 1 kHz)
> 65 dB
Output
XLR-3M, analog, 1 channel
Length
251 mm
Diameter
21 mm
Weight
95 g
ORDER NUMBER:
No. 140101 standard blue
No. 140102 anthracite gray
No. 140105 chromagreen